Saving the Day with Crochet: How to Make Crochet Headphone Covers

More and more every day I am convinced that you can crochet practically anything! I often find that being able to crochet, saves me shopping trips as well. Many times I have whipped up a birthday card decorated with crochet, which can be more special and meaningful to the recipient than buying one. 

Recently we were getting ready to go on a weekend trip, and when packing my daughter's headphones, we noticed that the foam covering on the ear pieces was falling apart. We bought these great Sony children's headphones in America. I haven't seen any like it in Kuwait, so I knew it was pointless to go searching for replacement foam covers or even a new pair of headphones. Then it occurred to me, that crocheted covers would be quick and easy to make. My daughter had fun going through my yarn stash to choose a lovely pink variegated yarn. In 20 minutes, the headphones had been fixed and upcycled into something unique and stylish. Problem solved and time saved, crochet to the rescue!

I am not sure if the size of the earpieces on headphones are standard, but these measure 1 15/16" (48mm) in diameter.

Sony Children's Headphones

Headphone Covers 

Yarn: DK weight, preferably a soft yarn that will be comfortable to wear on the ears.

Hook: Size E (3.50mm)

Abbreviations:
yo= wrap the yarn around the hook
ch= chain
dc= double crochet
sl st= slip stitch
st/ sts= stitch/ stitches
sc= single crochet
blo= back loop only of the stitch
flo= front loop only of the stitch

Stitch Guide

Invisible Fasten Off: Cut yarn leaving a 3" (8cm) tail. Insert the hook into the blo of the first st in the rnd, yo, and pull the yarn all the way through the loop on the hook, as if to fasten off in the usual way. Insert the hook in both loops of next st, yo with tail end and pull through st. Finally, insert the hook in the flo of last st in rnd, yo, pull yarn down through.

Instructions:
(make 2)

Rnd 1: Wrap the yarn twice around your finger to form a magic loop. Insert hook into loop, yo and pull up a loop, ch 3. Then, make 12 dc into ring. Sl st in first dc to end the rnd. Pull on the tail end of the yarn to tighten the magic loop and close the hole in the center. 

Rnd 2: Ch 3, dc in the same st, then 2 dc in each of the remaining sts around. Sl st in first dc to end the rnd. 

Rnd 3: Ch 3, dc in the same st, then dc in each of the remaining sts around. Sl st in first dc to end the rnd.

Rnd 4: Ch 1, sc in the same st, then sc in each of the remaining sts around. Invisible Fasten Off.

Weave in all loose ends with a yarn needle.

Now, simply slip the covers on and enjoy listening!

Make a Necklace with the Tinker's ToolBelt Pattern

Sometimes designs that are submitted to publications are accepted with modifications. The Tinker's ToolBelt was originally submitted as a necklace, and the editor decided that it would fit into their publication as a belt to go along with their Steampunk theme. Fortunately, it didn't require any changes to the pattern, it just needed more motifs to make it longer. That shows how versatile this design is! Fewer motifs tied together make an eye-catching statement necklace, and 2 motifs can make a wristlet. To make jewelry, you will need to use a little finer thread than what was used in the magazine. The belt motifs measure 3" in diameter, and the necklace motifs measure 2 1/4". I didn't change the pattern, only the thread. For the necklace I used DMC Petra No.5 and I went down a hook size to B/1 (2.25mm).

If you prefer fewer motifs, you can make the two ties on each side longer, join them together at the ends, and include a bobble on one side and a chain loop on the other for fastening. 

Crocheting Clothes Kids Love- a Sneak Peek!

In my last post about the book, I showed you the original sketches for designs that are on the cover. Today, I wanted to show you a design from inside the book. The publisher hasn't given us official photos to share yet, so I am showing you the design as I presented it to the editor. 

This is one of the boys designs from the book, although by changing the colors it could easily become a lovely girls scarf. I had the most fun choosing the colors for this project. If you haven't had a look at Cascade Yarns Superwash 220's 132 stunning colors, you should. If you can't find the color you are looking for in this yarn, it may not even exist! This was the first time I have used a yarn by Cascade, and it will definitely not be the last. It is really wonderful yarn to work with, and it is so soft you will forget it is wool! 

I wanted to design something colorful, fun, and that would look great with jeans. The asymmetrical arrangement of color blocks and stripes, looks especially good when it is tied. The personality of the scarf could change completely, depending on the colors you use. If you make the scarf a little longer, it could also be worn by a teen or adult. I used an unconventional hook placement with a simple crochet stitch to create a bold texture. I am looking forward to showing you actual photos of the scarf so you can see the texture and how well the colors play together!

How to Tie the Bows on the Tinker's Toolbelt

One of the key details on the Tinker's Toolbelt is the way the bows are tied. I experimented with many ways to tie them, and this method makes the bows lay just right.

1. Tie the top two ties in a half hitch, crossing the right tie over the left tie and wrapping the right tie around the left tie (like you are beginning to tie a shoe), and pull the ties tight.

2. Tie the bottom two ties in a half hitch, crossing the left tie over the right tie and wrapping the left tie around the right tie (like you are beginning to tie a shoe), and pull the ties tight.

3. Take the two ties on the left and make a loop and hold onto that with your left hand. Take the two ties on the right and wrap them around the loop made from the ties on the left, making sure that you begin wrapping from the bottom.

4. Bring the right ties through the loop just created, between the left side loops and the beginning of the right side wrapping.

5. Pull the bow tight and separate the loops.

Tinker's ToolBelt for Interweave Crochet Accessories

It my favorite time of year...time for the Interweave Crochet Accessories Issue! This year, I have a fun belt featured in the issue.

This is a great “on the go” project, because it stays in small pieces until the end when you tie all of the motifs together to make the belt. Two motifs are crocheted together to make each medallion. This gives the belt stability and makes a bolder statement. Make an extra set of motifs in case you want to wear the belt over layers of clothes, so you have the option to make it larger. This pattern could also have a home décor use as an interesting curtain tie-back.

The Valley Yarns Valley Cotton thread used for the sample, comes in 1260 yd cones. In case you would like to know the exact yardage to make the belt to fit a 24” waist, it is: 60 yd [55 m] Madder Brown (A), 96 [88 m] yd Sponge (B), 42 yd [38 m] Amber Gold (C). Each set of joined motifs with ties, requires 10 yd [9 m] (A), 16 yd [15 m] (B), 7 yd [6 m] (C).

Next week I will post a tutorial on how to tie the bows. I tied them in a special way, so they lay straight. I think it is important to show you how I did it, so your belt will look its best. Also, stay tuned for a post about how to use this pattern to make a necklace!

Here is a blog post on how to use this pattern to make a necklace. The Interweave store now has this pattern available for purchase and download.

Inspiration for Yarn Storage

Today is I love yarn day, and it has me thinking that I need to show my yarn more respect. Not that my Ikea storage boxes aren't working, but I think I need to decorate my studio with the same energy I put into my crochet designs. I was so inspired by Raising Up Rubies studio. She really demonstrates what I am talking about, and everything she puts in her studio has personality. I have a studio, but for some reason, I usually work at the dining room table! I think if I had a studio as amazing as Raising Up Rubies, I might never leave it! 

I want everything in my studio to be something I love. Antique treasures I have found, or  clever uses for things I already have. I have decided the first thing I want to collect are vintage candy/ cookie jars to store yarn in. They would be especially great for my collection of yarns for freeform crochet. I think they look wonderful sorted by color like this:

Dottie Angel repurposed a pair of clogs to use as a needle holder. I love the idea of making a souvenir into something useful!

This old library card catalog was converted into a sewing and yarn storage unit by bitsandbobbins. So charming!

Now I have a good excuse to go antique shopping again. I feel truly inspired today!

News About Tangled Webzine

Yesterday, I got an email from Tangled webzine. They told me that they will no longer exist, and their website will only be available until the end of October. It is sad news, as it really was a great publication filled with innovative and stylish knit and crochet patterns.

I designed two free patterns for them, the Helleborus Gloves, and the Cirque Du Crochet Bean Bags. I will be moving these patterns to Ravelry, so they can be downloaded from there. I am not sure if all of the designers will make their patterns available elsewhere. If you are interested, now is the time to go to their website and download any patterns you may want, before they disappear or become difficult to find!

Cirque Du Crochet Bean Bags

Helleborus Gloves